SAF-HOLLAND FIFTH WHEELS - SK-S 36.20 SERIES - SK-S 36.20 W
SAF-HOLLAND FIFTH WHEELS
SK-S 36.20 SERIES - SK-S 36.20 W
The lightweight, low maintenance spheroidal graphite cast iron 20 t fifth wheel
· Imposed load: 20,000 kg
· Overall heights: 128, 150, 185, 225, 250 mm
· D-value: 152 kN
· ECE test no.: E1 55R-01 0218
All of the fifth wheels in the SK-S 36.20 range from HOLLAND are particularly light thanks to the spheroidal graphite cast iron, and are equipped with a safety latch that allows coupling or uncoupling with one hand.
Additional convenient visual control of locking status through the position of the Automatic Safety Latch, indicating fully locked and secured (raised) or open (lowered) conditions.
With the low-maintenance design of the SK-S 36.20 W, SAF-HOLLAND supports the efforts of transporters to reduce the maintenance costs for their trucks and protect the environment.
This fifth wheel was designed specially for long-distance transport. It has plastic sliding plates on its contact area. In combination with the permanently maintenance-free rubber bearings and the plastic wear ring, there is only one lubrication point - on the lock - that requires a small amount of grease. The central lubrication unit connection is not required.
All wearing parts can be replaced easily and quickly. Low-maintenance fifth wheels thus save time and money and spare resources.
· Up to 33 kg lighter, designed for highway application
· Less grease consumption
· Easily replaceable low friction wear plates
· Safe single-handed operation, automatic safety lock
· Simple and safe wear adjustment
· Permanent, maintenance-free bearings
· Optionally available with RECOSS® system (available ex works as standard at Mercedes-Benz, Volvo and Renault)
· Optionally available with direct or angle bracket mounting
· Approved for forced steering
The best choice for your tractor
The low-maintenance fifth wheel SK-S 36.20 W has also been optimised in weight. It is convincing in that it is easy to operate and low-maintenance.
The plastic sliding plates mean that there is almost no manual lubrication required. All wearing parts can be replaced within a very short time.
The service life of SAF-HOLLAND fifth wheels is as long as that of the tractor. This contributes decisively to the economic efficiency of your entire vehicle.
Grease Cartridge
· Automatic single point long term dispenser for grease and oil
· No manual lubrication of lock mechanism required
· TÜV approved
· Contents: 125 ml
· Operating system: Hydrogen gas formation cell
· Operating pressure max. 3 bar
· Setting: continuous 1-12 months
· Average period of use approx. 6 months
· Operating temperature: from -20° C to +55°C ambient temperature
· Recommended storage temperature of 20°C ±5°C
SK-S 36.20 WS
The lightweight, low maintenance cast 20t fifth Wheel, prepared for RECOSS®
RECOSS® - The proven 3-sensor safety system for fifth wheel SK-S 36.20
For automatic lubrication of the locking mechanism we recommend the use of our grease dispenser with adaptor.
SK-S 36.20 DWS
The compact, low-maintenance, lightweight fifth wheel with direct mounting, prepared for RECOSS®.
The low-maintenance, lightweight fifth wheel for 2-axle 18t semi-trailer tractors for highway application in combination with RECOSS® - The proven 3-sensor safety system for fifth wheel SK-S 36.20.
For automatic lubrication of the locking mechanism we recommend the use of our grease dispenser with adaptor.
SK-S 36.20 VWS
The low maintenance cast 20t fifth wheel with mounting angles for Volvo vehicles prepared with RECOSS®
RECOSS® - The proven 3-sensor safety system for fifth wheel SK-S 36.20
For automatic lubrication of the locking mechanism we recommend the use of our grease dispenser with adaptor.
SK-S 36.20 W
The lightweight, low maintenance cast 20t fifth wheel.
· Weight optimised fifth wheel
· Dead weight reduced by 8 kg
· Designed for highway application
· Less grease consumption
· Easily changeable plastic wear plates
· Central lubrication system connection not required
· Single handed operation
· Automatic safety lock
· Simple and safe wear adjustment
· Permanent, maintenance-free bearings
For automatic lubrication of the locking mechanism we recommend the use of our grease dispenser with adaptor.
SK-S 36.20 DW
The compact, low-maintenance, lightweight fifth wheel with direct mounting, for 2-axle 18t semi-trailer tractors for highway application.
· Easy to mount directly on the vehicle chassis
· Weight optimised fifth wheel: higher payload
· Less grease consumption
· Easily changeable plastic wear plates
· Single handed operation
· Automatic safety lock
· Simple and safe wear adjustment
· Permanent, maintenance-free bearings
· EU test no.: e 1-00-0218
For automatic lubrication of the locking mechanism we recommend the use of our grease dispenser with adaptor.
SK-S 36.20 VW
The low maintenance cast 20t fifth wheel with mounting angles for Volvo vehicles.
· Weight optimised fifth wheel
· No additional mounting plate required
· 10-15 kg higher payload with lower payload
· Designed for highway application
· Less grease consumption
· Easily changeable plastic wear plates
· Central lubrication system connection not required
· Single handed operation
· Automatic safety lock
· Simple and safe wear adjustment
· Permanent, maintenance-free bearings
For automatic lubrication of the locking mechanism we recommend the use of our grease dispenser with adaptor.
